#Inventorcam 2016 sucks how to
#Inventorcam 2016 sucks code

The actual templates are easy to copy and edit, and making your own template is just that simple. My controller uses a standard that is quite close to the Fanuc 3-axis generic code.

#Inventorcam 2016 sucks code

When you start working with your part, you are prompted to indicate to InventorCAM what machine template to use for the code output.

InventorCAM G-Code TemplatesĮvery code that is output is built from a template that pulls data entered into the InventorCAM dialogs, and formats the G-Code accordingly. Generate on the other hand, re-writes the file and opens it in Notepad (or whatever default application you choose). InventorCAM stores each file in a folder specified in the settings, and associates this file to open whenever a List request is made. I was troubleshooting so I split mine into two.

This will post the entire process into one file. Additionally you can do the same to the Operations header, and GCode All. Highlight all the operation that you want to output, right click and pick GCode, then Generate. In the interest of a consistent timeline, I’ll show easy process of generating the G-Code for any or all the operations. The topic can become lengthy, and I can add some more information about this later.

#Inventorcam 2016 sucks how to

With that said, I’d like to stop the discussion about the two systems, and simply say that the more integration of your machine’s characteristics you want in your G-Code, the more I recommend going beyond this article to study how to integrate your machine’s behavior into InventorCAM.

InventorCAM has a Coordinate System Manager that keeps track of how your part is related to a machine’s coordinates. Each CAM application deals with these differently. Coordinate SpaceĮvery machine that is running on G-Code uses both Machine coordinates (absolute area of the machine) and Work coordinates (relative to the part). Today I will discuss how InventorCAM deals with certain G-Code tool movements, including tool changes. I spotted a few problems, and decided the troubleshooting session would be good to relay to you. It’s been awhile and wanted to test it our on some really minute features. I spent this past 4th of July getting my machine controller back in motion.